QSC CMX2000Va
Features
“Flex-Use” loading options allows CMX Series amps to drive low-impedance loads down to 2 ohms, and certain models can direct-drive (no output transformer) 70V and 100V distributed loudspeaker systems
“Flex-Use” input connectivity choices including actively balanced barrier strip, XLR, or ¼" TRS
“Flex-Use” output connectivity choices include NL4 Speakon™ and detachable terminal block
Rack mountable with chassis less than 16" (40.6 mm) deep
1-dB recessed, detented gain controls for fast, accurate, and repeatable settings
Tamper-proof security cover for gain controls
Recessed rear DIP switches for easy selection of stereo, parallel, or bridged mode operation, and enabling/disabling low-frequency filter protection
Low-noise variable-speed fans with rear-to-front airflow help keep amplifiers and racks cool
QSC CMX2000Va
CMX300Va CMX500Va CMX800Va CMX2000Va Stereo Mode (both channels driven)
8Ω FTC 0.1% THD
8Ω EIA 0.1% THD
4Ω FTC 0.1% THD
4Ω EIA 0.5% THD
2Ω EIA 1% THD
70V Direct EIA 1% THD
100V Direct EIA 1% THD
FTC: 20 Hz–20 kHz after preconditioning
EIA: 1 kHz185 W
200 W
280 W
300 W
430 W
–
–
260 W
300 W
400 W
500 W
700 W
–
–
450 W
500 W
650 W
800 W
1200 W
400 W
–
1050 W
1100 W
1600 W
2000 W*
2500 W
2500 W
1000 W
Bridge Mono Mode
8Ω FTC, 0.1% THD
8Ω EIA, 0.1% THD
4Ω EIA, 1% THD
70V Direct Drive EIA, 1% THD
100V Direct Drive EIA, 1% THD
FTC: 20 Hz–20 kHz after preconditioning; both channels driven simultaneously
EIA: 1 kHz530 W
600 W
830 W
600 W
–
800 W
900 W
1400 W
1200 W
600 W
1300 W
1500 W
2400 W
2000 W
2300 W
3200 W
3600 W
5000W
5000 W
3600 W
Signal to Noise (20 Hz–20 kHz, 8Ω) > 100 dB Input Sensitivity into 8Ω 1.15 V (+3.4 dBu) 1.14 V (+3.4 dBu) 1.23 V (+4.0 dBu) 1.42 V (+5.3 dBu) Max Voltage Gain 31.6× (30 dB) 40× (32 dB) 46× (33 dB) 64× (36 dB) Output Circuitry Class AB Class AB 2-tier Class H 3-tier Class H Current Draw (pink noise program)
Typical, 1/8 power 4Ω, 120 V
Typical, 1/8 power 4Ω, 230 V
Severe, 1/3 power 4Ω, 120 V
Severe, 1/3 power 4Ω, 230 V
4.4 A
2.2 A
6.6 A
3.3 A
5.4 A
2.7 A
9.6 A
4.8 A
6.3 A
3.2 A
15.6 A
7.8 A
13.9 A
7 A
26.9 A
13.5 ADistortion (SMPTE-IM) < 0.02% < 0.01% < 0.01% < 0.01% Distortion (typical)
20 Hz–20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power
< 0.03% THD / 4Ω and 8Ω
< 0.03% THD / 4Ω and 8ΩFrequency Response 20 Hz–20 kHz: ±1 dB; -3 dB points: 5 Hz and 50 kHz Damping Factor (1 kHz and below) > 300 at 8Ω Input Impedance 10 kΩ unbalanced, 20 kΩ balanced Input Clipping 10 V rms (+22 dBu) Cooling Continuously variable-speed fan, rear-to-front air flow Connectors (each channel) Input: Active balanced; barrier strip, XLR and ¼" (6.3 mm) – TRS tip and XLR pin 2 positive
Output: Detachable terminal block and Neutrik™ Speakon™Controls Front: AC switch, Channels 1 & 2 gain knobs
Rear: 10-position DIP switchIndicators Power-on: Green LED / Signal: Green LED (1 per channel) / Clip: Red LED (1 per channel) Amplifier Protection Stable into reactive or mismatched loads Load Protection On/off muting, AC coupling (CMX 300Va and CMX 500Va), triac crowbar (CMX 800Va and CMX 2000Va on each channel) Power Requirements 120 or 230 VAC, 50 – 60 Hz Dimensions (HWD)
2 RU models
3 RU model (CMX 2000Va)
3.5" (8.9 cm) 2 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support ears
5.25" (13.3 cm) 3 rack spaces x 19" (48.3 cm) rack mounting x 15.9" (40 cm) deep to rear support earsWeight - Net 35 lb (15.9 kg) 40 lb (18.2 kg) 44.5 lb (20.2 kg) 75 lb (33.1 kg) Weight - Shipping 41 lb (18.6 kg) 46 lb (20.9 kg) 50.5 lb (23 kg) 87 lb (37.2 kg)