Overview
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|1200 offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more. Designed for ease-of-use in a variety of applications, the 4|1200 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
Features:
- DriveCore Technology: patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliability
- Supports configuration and control using HiQnet Audio Architect
- Monitoring and control over TCP/IP
- Color LCD and front-panel user interface for amplifier configuration, control, and monitoring
- Programmable GPIO (general purpose input/output) control port
- Digital signal processing (input/output EQ filters, crossover, input/output delay, LevelMAX limiters)
- Support for importing of FIR filter coefficients
- 20 device presets—1 factory and 19 user
- 96 kHz/32-bit floating-point signal processing
- Universal power supply with PFC for reduced current draw and industry-leading efficiency
- Power saving modes
- Remote power off—Sleep mode activated via AUX port
- 70/100Vrms direct drive
- Each channel independently configurable for low z or high z operation
- Advanced protection circuits—amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/undervoltage, and high-frequency overload
- Three-year, no-fault transferable warranty—your investment is fully protected
- Complies with GreenEdge by HARMAN—environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation
- Support for BSS Audio Soundweb Contrio Ethernet wall controllers
Crown CDi4x1200 1200 watts per channel 4 channel amplifier, 70/100V, 4/8 ohm
$4,309.59Precio
- Number of Channels: 4
- Power Rating:
- 200 W per Channel
- 2400 W Bridged
- Load Impedance / Voltage
- Stereo:
- 2 / 4 / 8 / 16 Ohms per Channel
- 70 / 100 V per Channel
- Bridged:
- 4 / 8 / 16 Ohms
- 140 / 200 V
- Performance
- Protections: DC Fault, Low Impedance, Open Circuit, Overcurrent, Overvoltage, Ultrasonic, Undervoltage
- Frequency Response: 20 Hz to 20 kHz ±0.25 dB (8 Ohms)
- Damping Factor: 1000
- Input Sensitivity
- Line:
- 0.7 Vrms to 2.5 Vrms / -.8 dBu to 10.2 dBu (at 8 Ohms)
- 1 Vrms to 3.5 Vrms / 2.2 dBu to 13.2 dBu (at 70 V)
- 1.4 Vrms to 5 Vrms / 5.2 dBu to 16.2 dBu (at 100 V)
- Input Impedance
- 10 Kilohms (Balanced)
- 5 Kilohms (Unbalanced)
- Max Gain: 34 dB (at 4 Ohms, at 8 Ohms, at 70 V, at 100 V)
- Max Input Level: +20 dBu
- SNR: 104 dB
- THD: 0.35% (at Rated Power)
- Intermodulation Distortion: ≤ 0.35%
- Crosstalk: 80 dB (Below Rated Power)
- CMRR: 70 dB
- Line:
- Signal Processing
- DSP: 32-Bit Floating Point DSP at 96 kHz
- Audio Delay: Adjustable Up to 1000 ms per Channel
- Crossover
- High-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Bessel
- High-Pass: 16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth
- High-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley
- Low-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Bessel
- Low-Pass: 16 to 20 kHz, 6/12/24/48 dB/Octave Butterworth
- Low-Pass: 16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-Riley
- EQ: 8-Band Parametric EQ per Channel
- Limiting: Yes
- Connectivity
- Analog Audio I/O
- 2 x Block 6-Pin Balanced Line Input
- 2 x Barrier Strip 4-Pin Speaker Output
- Digital I/O: 1 x RJ45 Ethernet Input/Output (Control)
- USB: No
- Analog Audio I/O
- Power
- AC Input Power
- Universal: 100 to 240 VAC, 50 / 60 Hz
- AC Power Connector: 1 x IEC 15 A / NEMA 5-15
- Current Consumption
- 120 VAC:
- 6.8 to 7.6 A (1/8 Power)
- 15 to 17.7 A (1/3 Power)
- 230 VAC:
- 3.5 to 4.1 A (1/8 Power)
- 2.5 to 9.2 A (1/3 Power)
- 120 VAC:
- Power Consumption
- 120 VAC:
- 213 to 293 W (1/8 Power)
- 392 to 679 (1/3 Power)
- 230 VAC:
- 212 to 278 W (1/8 Power)
- 398 to 546 (1/3 Power)
- 120 VAC:
- Physical
- Display & Indicators
- Front Panel: 1 x Multi-Color Graphic LCD
- Rackmount Size: 2 RU
- Cooling: Fan (Variable Speed)
- Thermal Dissipation: 1865 BTU/hr (Maximum)
- Dimensions: 19.0 x 3.5 x 14.7" / 48.3 x 8.9 x 37.4 cm
- Weight: 20.1 lb / 9.1 kg
- Packaging Info
- Package Weight: 24.175 lb
- Box Dimensions (LxWxH): 21.6 x 21.5 x 6.3"