top of page

Overview

 

All-Weather Compact 2-Way Coaxial Loudspeaker with 6.5" LF

 

The AWC62 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types.

 

Features

 
  • Highly weather-resistant IP56 rating.
  • Consistent 110° x 110° broadband pattern control.
  • Components:
    • 165 mm (6.5 in) woofer with Kevlar-reinforced cone and 38 mm (1.5 in) voice coil.
    • 25 mm (1 in) exit compression driver
  • Extraordinary clarity for speech, with extended frequency response for music.
  • Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
  • 175 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability.
  • High-power passive crossover network.
  • Overload protection.
  • 70 Hz – 18 kHz frequency response.
  • 120 Watt 70V/100V multi-tap (built-in transformer) or direct 8Ω low-impedance.

JBL AWC62 6.5" 2-Way All-Weather Compact Co-axial Loudspeaker. Light Gray

$469.52 Precio
$376.00Precio de oferta
  • Frequency Range (-10dB) 70 Hz – 18 kHz
    Frequency Response (±3 dB) 100 Hz – 16 kHz
    Coverage Pattern 110º x 110º
    Directivity Factor (Q) 7.2 (1 k – 16 kHz)
    Directivity Index (DI) 7.9 dB (1 k – 16 kHz)
    System Power Rating 175 W 2 hrs. 120 W 100 hrs (IEC rated)
    Sensitivity (2.83V @ 1m) 92 dB (Ave. 100 Hz – 18 kHz)
    Maximum SPL (1m) Direct 8Ω: 114 dB (peaks of 120 dB)120 W Tap: 112 dB
    Crossover Network 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF
    Nominal Impedance 8 ohms
    Transformer Taps 70V: 120W, 60W, 30W, 15W 100V: 120W, 60W, 30W
    LF Driver Kevlar-reinforced cone with weather treatment, 38 mm (1.5 in) voice coil.
    HF Driver 25 mm (1 in) diaphragm and voice coil diameter
    HF Driver Protection Minimum audibility SonicGuard™ HF overload protection
    Enclosure ABS with Glass enclosure
    Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
    Grille Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing.
    Input Connection CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16”) and 9.0 mm (0.36”).
    Environmental IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for acid-air/salt-spray (336 hrs).
    Dimensions 259 x 259 x 255 mm (10.2 x 10.2 x 10.1 in), cabinet 288 mm (11.4 in) including gland nut 309 mm (12.2 in) including bracket extending to back
    Colors Available in gray (similar to Pantone 420C) and black (-BK)
    Net Weight (each) 6.8 kg (15.0 lb), 7.7 kg (17.0 lb) with U-bracket
    Shipping Weight 8.8 kg (19.5 lb)
    Included Accessories U-bracket, matches loudspeaker color (gray or black), zinc-rich extra thick powder coated, steel.
    Crossover Modes Passive
    System Sensitivity (1w @ 1m) 92 dB (Ave. 100 Hz – 18 kHz
    Suspension Attachment Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel.
bottom of page