Martin Ext PixLine 10 RGB 1280mm Diff Front Alu

Length:

Available in 320 mm (12.6 in.) and 1280 mm (50.4 in.) length versions

Width:

27 mm (1.1 in.)

Height:

with flat diffuser / clear front: 32 mm (1.3 in.)
with flat diffuser / clear front in mounting profile: 74 mm (3.0 in.)
with graze (asymmetric wallwasher) lens: 42 mm (1.7 in.)
with asymmetric wallwasher lens in mounting profile: 84 mm (3.4 in.)
with round diffuser: 42 mm (1.7 in.)
with round diffuser in mounting profile: 84 mm (3.4 in.)

Weight:

1.2 kg / m (0.9 lbs. per foot)
Custom lengths are available to special order on project basis as follows:

Minimum custom length: 300 mm (11.9 in.)
Maximum custom length: 2000 mm (78.8 in.)
Custom length increments: 20 mm (0.8 in.)

 

Control and Programming

• • Control options: P/N 90721030
  • Control modes: RGB, basic, segment and pixel-level
  • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
  • Protocol detection: Automatic
  • Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
  • DMX channels: 3/10/13/31/55/199
  • Color and intensity calibration: Pixel-level
  • Firmware update: Via Martin P3™ System Controller
  • DMX compliance: USITT DMX512-A
  • RDM compliance: ANSI/ESTA E1.20

Optics

• • Options:

    Clear Front: Viewing angle 110°
    Flat Diffuser: Viewing angle 160°
    Round Diffuser: Viewing angle 260°
    Square Diffuser: Viewing angle 300°
    Asymmetric graze Lens: Beam angle 25° X 85°

  • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
  • LED manufacturer: Osram
  • *Figure obtained under manufacturer’s test conditions

Photometric Data

• • Color resolution: 16 bits per color (48 bit per pixel)
  • Pixels: 100 per meter
  • Pitch (pixel center-to-center): 10.00 mm
  • Luminous intensity: 250 cd per meter (calibrated mode)
  • Total output, calibrated mode: 500 lumens per meter (8,333 nits (modules spaced 30 mm center-to-center))

Video Processing

• • Brightness control
    Gamma correction and control
    Color temperature control
    Color space control
    Calibration processing
    Synchronization

Signal Protocol

• • P3 (via Martin P3™ PowerPort) or DMX

Construction

• • Color: Alu Grey (customized colors available on project basis)
  • Base: Extruded aluminum profile
  • Protection rating: IP66
  • Impact resistance: IK05
  • Corrosion resistance: C5-M (very high corrosivity/marine, ISO 2944)
  • RoHS compliant

Installation

• • Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting profile
  • Orientation: Any

Connections

• • Power and data input: 6-pin custom (BBD) IP66-rated
  • Power and data thru: 6-pin custom (BBD) IP66-rated
  • Hot plugging compatible

Electrical

• • Nominal input voltage: 48 VDC +/- 4%
  • Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Martin IP66 PSU or generic 48 VDC PSU
  • Maximum total power consumption: 33 W per meter (at max. intensity, full white)
  • Surge protection: 4 KV

Thermal

• • Cooling: Convection
  • Maximum ambient temperature (Ta max.): 55° C (131° F)*
  • Minimum ambient temperature (Ta min.): -30° C (-22° F)
  • Total heat dissipation (calculated, +/- 10%): 115 BTU/hr per meter
  • *Above this temperature, the fixture regulates output to protect from overheating (P3 thermal throttling)

Approvals

• • EU safety: EN 60950-1, EN 60950-22
  • EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
  • US safety: UL 60950-1, UL 60950-22
  • US EMC: FCC Part 15 Class A
  • Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
  • Canadian EMC: ICES-003 Class A
  • Australia/NZ: RCM