Overview
Martin Ext PixLine 20 RGB 310mm Rnd Dif Fr Alu
$417.35Precio
- Physical
- Length: Available in 320 mm (12.6 in.) and 1280 mm (50.4 in.) length versions
- Width: 27 mm (1.1 in.)
- Height:
- with flat diffuser / clear front: 32 mm (1.3 in.)
with flat diffuser / clear front in mounting profile: 74 mm (3.0 in.)
with graze (asymmetric wallwasher) lens: 42 mm (1.7 in.)
with asymmetric wallwasher lens in mounting profile: 84 mm (3.4 in.)
with round diffuser: 42 mm (1.7 in.)
with round diffuser in mounting profile: 84 mm (3.4 in.)
- with flat diffuser / clear front: 32 mm (1.3 in.)
- Weight: 1.2 kg / m (0.9 lbs. per foot)
- Custom lengths are available to special order on project basis as follows:
- Minimum custom length: 300 mm (11.9 in.)
Maximum custom length: 2000 mm (78.8 in.)
Custom length increments: 20 mm (0.8 in.)
- Minimum custom length: 300 mm (11.9 in.)
- NB: To allow for thermal expansion, fixtures are 10 mm shorter than the nominal lengths given above
- *Fixtures must be installed with a 10 mm gap to allow for thermal expansion
- Control and Programming
- Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX
- Control modes: RGB, basic, segment and pixel-level
- Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
- Protocol detection: Automatic
- Setting and addressing: Martin P3™ System Controller or RDM-compliant controller
- DMX channels: 3/10/13/31/55/199
- Color and intensity calibration: Pixel-level
- Firmware update: Via Martin P3™ System Controller
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20
- Control/User Interface
- Device status: Multi-color visual indication
- Device test and reset: Magnetic switch to call up local test patterns and reset device
- Optics
- Options:
- Clear Front: Viewing angle 110°
Flat Diffuser: Viewing angle 160°
Round Diffuser: Viewing angle 260°
Square Diffuser: Viewing angle 300°
Asymmetric graze Lens: Beam angle 25° X 85°
- Clear Front: Viewing angle 110°
- Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
- LED manufacturer: Osram
- *Figure obtained under manufacturer’s test conditions
- Options:
- Photometric Data
- Color resolution: 16 bits per color (48 bit per pixel)
- Pixels: 50 per meter
- Pitch (pixel center-to-center): 20.00 mm
- Luminous intensity: 125 cd per meter (calibrated mode)
- Total output, calibrated mode: 250 lumens per meter (4,166 nits (modules spaced 30 mm center-to-center))
- Video Processing
- Brightness control
Gamma correction and control
Color temperature control
Color space control
Calibration processing
Synchronization
- Brightness control
- Signal Protocol
- P3 (via Martin P3™ PowerPort) or DMX
- Construction
- Color: Clear anodized (customized colors available on project basis)
- Base: Extruded aluminum profile
- Protection rating: IP66
- Impact resistance: IK05
- Corrosion resistance: C5-M (very high corrosivity/marine, ISO 2944)
- RoHS compliant
- Installation
- Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting profile
- Orientation: Any
- Connections
- Power and data input: 6-pin custom (BBD) IP66-rated
- Power and data thru: 6-pin custom (BBD) IP66-rated
- Hot plugging compatible
- Electrical
- Nominal input voltage: 48V DC +/- 4%
- Power supply options: Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP, Martin IP66 PSU or generic 48 VDC PSU
- Maximum total power consumption: 17 W per meter (at max. intensity, full white)
- Surge protection: 4 KV
- Thermal
- Cooling: Convection
- Maximum ambient temperature (Ta max.): 55° C (131° F)*
- Minimum ambient temperature (Ta min.): -30° C (-22° F)
- Total heat dissipation (calculated, +/- 10%): 55 BTU/hr per meter
- *Above this temperature, the fixture regulates output to protect from overheating (P3 thermal throttling)
- Physical