top of page
Martin EXTERIOR DOT-HP,DIFFUSED DOME,RGB,ALU
Overview
 
Martin by HARMAN Exterior Dot-HP is a bright, outdoor-rated dot designed to create media facades or perimeter lighting on large buildings and structures for long-distance viewing. This high-performance exterior LED dot for large venues allows for long fixture runs with variable pixel pitches for flexible designs. A creative tool for lighting designers, the Exterior Dot-HP is available in two versions – RGB color mixing or cool white – with a number of front designs for a variety of unique looks. It is driven by the Martin P3 System Controller family for easy setup and video display. The Exterior Dot-HP is also compatible with RDM/DMX for smaller setups.
How processing works for LED video
  • High-intensity calibrated video dot
  • Rugged IP66 housing for permanent outdoor installations
  • Easy setup and long cable runs for clean installation
Features
  • 100 lumen per dot calibrated
  • Available in clear front, diffuser dome and directional lens variants
  • RGB or cold white LED engine
  • Flexible mounting system allows for customized solutions
  • Local integral in-built diagnostics tool
  • High-quality 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/RDM/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input over single cable
  • Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system

Martin EXTERIOR DOT-HP,DIFFUSED DOME,RGB,ALU

$424.76Precio

  • Physical

    • Diameter: 72 mm (2.9 in.)
    • Height with clear front: 34 mm (1.4 in.)
    • Height with dome front: 49 mm (2 in.)
    • Height with directional front: 43 mm (1.7 in.)
    • Weight, clear front and dome front models: 300 g (0.7 lbs.)
    • Weight, directional front models: 350 g (0.8 lbs.)

    Control and Programming

    • Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP and/or RDM/DMX
    • Control modes: RGB (RGB variants), white intensity (CW variants), basic
    • Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color
    • Protocol detection: Automatic
    • Setting and addressing: Martin P3™ System controller or RDM-compliant DMX controller
    • DMX channels: 3/10
    • Calibration: Color and intensity for each Dot
    • Firmware update: Via Martin P3™ System Controller
    • DMX compliance: USITT DMX512-A
    • RDM compliance: ANSI/ESTA E1.20

    Control/User Interface

    • Device status: Multi-color visual indication
    • Device test and reset: Magnetic button to call up fixture status and test fixture

    Optics

    • Options:
    • Clear Front
    • Dome Front
    • Directional Front (TIR lens)
    • LED manufacturer, Exterior Dot-HP RGB: Osram
    • LED manufacturer, Exterior Dot-HP CW: Seoul
    • Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
    • *Figure obtained under manufacturer’s test conditions

    Photometric Data

    • Color resolution: 16 bits per color (48 bit per pixel)
    • Dot pitch: 72 mm - 500 mm (center-to-center)
    • Color Temperature:
    • Cool white (CW): 6700K±300K
    • RGB: 2.000 – 10.000 K (adjustable via P3 or DMX)
    • Viewing angle:
    • Clear front: 103° x 103° (half-peak)
    • Dome front: 125° x 125° (half-peak)
    • Directional front: 22° x 22° (half-peak)
    • RGB Dots:

    Total output, calibrated mode

    • Clear front: 90 lumens, 36 cd
    • Dome front: 62 lumens, 18 cd
    • Directional front: 72 lumens, 270 cd

    Total output, non-calibrated mode

    • Clear front: 120 lumens, 48 cd
    • Dome front: 80 lumens, 24 cd
    • Directional front: 96 lumens, 360 cd
    • Cool White Dots:

    Total output, calibrated mode

    • Clear front: 160 lumens, 62 cd
    • Dome front: 110 lumens, 32 cd
    • Directional front: 120 lumens, 590 cd

    Total output, non-calibrated mode

    • Clear front: 210 lumens, 82 cd
    • Dome front: 142 lumens, 41 cd
    • Directional front: 160 lumens, 775 cd

    Video Processing

    • Brightness control
    • Gamma correction and control
    • Color temperature control
    • Color space control
    • Calibration processing
    • Synchronization

    Signal Protocol

    • P3 (via Martin P3™ PowerPort) or RDM/DMX

    Construction

    • Color: Electrostatic powder-coated (custom colors available by special order) (custom colors available on project basis)
    • Base: Cast aluminum
    • Protection rating: IP66
    • Impact resistance: IK05
    • Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
    • RoHS compliant

    Installation

    • Mounting points: Direct surface mount, optional mounting plate or optional mounting profile
    • Orientation: Any

    Connections

    • Power and data input: 6-pin custom (BBD) IP66-rated
    • Power and data thru: 6-pin custom (BBD) IP66-rated
    • Hot-pluggable

    Electrical

    • Nominal input voltage: 48 VDC +/- 4%
    • Power supply options: Martin P3™ PowerPort 1500, P3™ PowerPort 1000 IP, Martin™ IP66 PSU or generic 48 VDC PSU
    • Typical total power consumption, calibrated mode: 5 W at full intensity, full white
    • Typical total power consumption, uncalibrated mode: 7 W at full intensity, full white
    • Surge protection: 4 KV

    Thermal

    • Cooling: Convection
    • Maximum ambient temperature (Ta max.): 55° C (131° F)
    • Minimum ambient temperature (Ta min.): -20° C (-4° F)
    • Total heat dissipation (calculated, +/- 10%): 20 BTU/hr.

    Approvals

    • EU safety: EN 60950-1, EN 60950-22
    • EU EMC: EN 55024, EN 55032 (Class A), EN 61000-3-2, EN 61000-3-3
    • US safety: UL 60950-1, UL 60950-22
    • US EMC: FCC Part 15 Class A
    • Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
    • Canadian EMC: ICES-003 Class A
    • Australia/NZ: RCM
bottom of page