Physical
· Length: 164 mm (6.5 in.) including mounting ears
· Width: 68 mm (2.7 in.)
· Height: 36 mm (1.5 in.)
· Weight: 590 g (1.3 lbs.)
Control and Programming
· Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ / Martin P3 PowerPort 1000 IP™ and/or DMX
· Control modes: Adapts to detected product
· Protocol detection: Automatic
· Product detection: Automatic
· Setting and addressing: P3 System Controller or RDM-compliant controller
· DMX channels: Adapts to detected product
· Firmware update: Via P3 System Controller
· DMX compliance: USITT DMX512-A
· RDM compliance: ANSI/ESTA E1.20
Control/User Interface
· Device status: Multicolor status LED
· Device test and reset: Pushbutton to call up local test patterns and reset device
Video Processing
· Brightness control
Gamma correction and control
Color temperature control
Calibration processing
Synchronization
Construction
· Housing: Extruded aluminum
· Protection rating: IP65
· RoHS compliant
Installation
· Orientation: Any
· Surface mounting: Two M6 mounting slots
· Truss mounting: M12 mounting hole for standard rigging clamp
Connections
· Power & data input: 6-pin custom (BBD) IP66-rated*
· Power & data thru: 6-pin custom (BBD) IP66-rated*
· Power & data output: 8-pin custom, IP67-rated
· *Legacy model with M16 connectors available on request.
Electrical
· Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ / P3 PowerPort 1000 IP™ / IP66 PSU 240W or external PSU
· Output voltage : 15 VDC
· Maximum total power consumption: 135 W
Thermal
· Cooling: Convection
· Maximum ambient temperature (Ta max.): 55° C
· Minimum ambient temperature (Ta min.): -20° C
· Total heat dissipation (calculated, +/- 10%): 46 BTU/hr. (not including display devices but with system at full load)
· Thermal monitoring: Integrated temperature sensor allowing thermal protection shutdown
Approvals
· EU safety: EN 60950
· EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
· US safety: ANSI/UL 60950-1
· Canadian safety: CSA C22.2 No. 60950-1
Accessories
· M16 Connector Models:
Input Cables, M16 Connectors:
Hybrid P3 Input Cable, 4-pin male XLR to female M16, 0.25 m (0.8 ft.): P/N 110840165
DMX and Martin® IP66 PSU 240W / Tripix Power IP66 input cable, 5-pin male XLR plus Martin® IP66 240W PSU connector to female M16: P/N 11840195
DMX and generic 48 VDC PSU input cable, 5-pin male XLR plus two wire tails to female M16: P/N 11840174
Output Cables, M16 Connectors:
Hybrid output cable for P3 systems, male M16 to 4-pin female XLR, 0.25 m (0.8 ft.): P/N 11840166
Hybrid output cable for DMX systems, male M16 to 5-pin female XLR, 0.25 m (0.8 ft.): P/N 11840202
Extension Cables, M16 Connectors:
Hybrid extension cable, M16 to M16, 1 m (3.2 ft.): P/N 11840167
Hybrid extension cable M16 to M16, 2.5 m (8.2 ft.): P/N 11840168
Hybrid extension cable, M16 to M16, 5 m (16.4 ft.): P/N 11840169
Hybrid extension cable, M16 to M16, 10 m (32.8 ft.): P/N 11840170
Hybrid extension cable, M16 to M16, 25 m (82 ft.): P/N 11840164
Loose M16 Connectors:
M16 connector, male: P/N 05343522
M16 connector, female: P/N 05323538
