Overview
Shure MX180/N Lavalier Microphone Housing, In-Line Preamp with XLR, No Cartridge
 
MX180/N Microflex Lavalier Microphone Housing
 
Specifications
 
Transducer
Electret Bias Condenser This Kit Consists of a Lavalier Housing with NO Cartridge
Polar Pattern
N/A, (Must Use One of the Following Cartridges: R183B - Omnidirectional, R184B - Supercardioid, or R185B - Cardioid)
Frequency Response
50 Hz - 17 kHz
Dynamic Range (Typical)
92.6 dB, (100 dB at 0 Gain)
Signal-to-Noise Ratio
MX183: 73.5 dB
MX184: 67.5 dB
MX185: 66.0 dB, (All Referenced at 94 dB SPL)
Maximum Input Sound Level
MX183: 116.7 dB
MX184: 122.7 dB
MX185: 124.2 dB, (All Settings +6 dB 0 Gain)
Power Requirements
Phantom Power, (11 to 52v DC , 2.0 mA)
Output Impedance
150 Ohms, (180 Ohms Actual)
Output Connectors
Switchcraft TA4F, (Mini 4 Pin Connector), (@ End of Microphone Housing Wire)
XLR-3M Type, (@ End of In-Line Pre-Amp)
Pad
None
Low Frequency Roll-Off
None
Applications
Speech, Lectures, Plays, Videography etc.
Dimensions
Microphone Housing: .85 x .46" (22 x 12mm) LxDiameter
In-Line Pre-Amp: 3.89 x .79" (99 x 20mm) LxDiameter
Cable: 4' (1.2m) Long (w/TA4F Connector)
Weight
.06 oz. (1.7 g)
Packaging Info
Packaging Info
Package Weight
0.91 lb
Box Dimensions (LxWxH)
10.0 x 4.8 x 3.3"