Overview

The NMX-ENC-N2312 Encoder and NMX-DEC-N2322 Decoder provide a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution that can be used in 4K applications with resolutions up to 4096x2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks.

Any source can be sent to one or more displays by routing through layer-2 / layer-3 switches utilizing standard Cat5e cable. The NMX-ENC-N2312 includes standard features like input scaling, bi-directional serial, IR, embedded 7.1 audio, and KVMover- IP extension. It also comes in a card version compatible with SVSI's N9206 card cage for high-density applications.

Features

Design Flexibility — Start as small as 1x1 and grow the system in increments of single sources and devices by simply adding additional encoders and decoders
Advanced Security including SSL/TLS and HTTPS — Satisfies enterprise network security requirements.
Infrared (IR) — Emitter connection allows control of IR-only display devices
Fast Install — With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces
Balanced and Unbalanced Audio — Embedded 7.1 digital audio or balanced/unbalanced analog audio
Pass Through HDMI — allows easy installation with local display such as desktop PC applicaitons
Multiple Connection Options — RJ-45 and SFP network connectors and HDMI video connections
KVM — Single USB-B for KVM applications
Native NetLinx — NetLinx Studio will easily recognize the device

AMX NMX-ENC-N2312-C SVSI N2300 Series 4K Encoder card with one SFP fiber/RJ45

$1,223.30

Quantity

Audio	Input Signal Types: Embedded audio on HDMI (DVI-D through adapter) or Analog Stereo (Balanced or Unbalanced) Output Signal Types: Ethernet, Embedded audio on HDMI or DVI-D (through adapter) HDMI Audio Formats: 8ch PCM Analog Audio Format: Stereo 2-channel Analog-To-Digital Conversion: 48 kHz
Keyboard and Mouse	Keyboard & Mouse: Connect the Decoder to the keyboard and mouse, and an N2300 Series Encoder to the PC being controlled
Latency	Latency 17-ms at 60 fps for 1920x1080 and lower resolutions 34-ms at 30 fps for 4K30 NOTE: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency. Scaling adds one frame of latency (17ms at 60fps) Switching: Up to 1.5s delay, not seamless
Bandwidth	Bandwidth: Approximately 160 Mb/s Note: Minimum bandwidth is 50 Mb/s for resolutions <= 1080p60
Communications	Ethernet - PO 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP Ethernet - P1 1 Gbps port which accepts compatible fiber transceivers or direct attach cables, DHCP, Auto IP, and static IP HDMI: HDCP, EDID management
Ports	+12V 2A: One 12 Volt DC power input PO 8-wire RJ45 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides network connection, network AV video, and power to the Encoders and Decoders PoE power P1 1-Gbps SFP+ port (SFP+ fiber transceiver or direct attach cable not included) Provides network connection and networked AV video IR IN (front panel): 3-pin terminal Phoenix connector. Provides Infrared (IR) input only and passes signal back to connected decoder (33-60 kHz; typically 39 kHz) IR receiver is necessary (not included) IR OUT 2-pin terminal Phoenix connector Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter is necessary (not included) RS232 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 1200-115200 baud rate AUDIO 5-pin terminal Phoenix connector which provides userselectable balanced/unbalanced input Dedicated audio input HDMI OUT: HDMI video output (passive pass-through from HDMI IN) HDMI IN: HDMI video input VGA IN: DB15 analog input
Controls and Indicators - Front Panel	RESET Button Recessed pushbutton Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings ID Button Recessed pushbutton Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command) POWER LED On solid (green) when operating power is supplied (via PoE or local power supply) This activity is also shown by the PWR LED on the rear panel STATUS LED On flashing (green) when there is software activity This activity is also shown by the STAT LED on the rear panel
Controls and Indicators - Rear Panel	PWR LED: Same as POWER LED described above HDMI LED: On (green) when there is a connection to a valid HDMI source but will not light for VGA source STAT LED: Same as STATUS LED described above STRM LED: On (green) when the unit is streaming video FAN: None
Environmental	Temperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: Up to ~44 BTU/hr
General	Mounting Options Regulatory Compliance: FCC, CE, and NTRL Recommended Accessories NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
FG Numbers	FGN2312-CD

AMX NMX-ENC-N2312-C SVSI N2300 Series 4K Encoder card with one SFP fiber/RJ45

Specifications

EVENT PRO GEAR

SERVICES

COMPANY

FOLLOW US