Overview
INTEGRAL-A1602 is a dual channel, 2U, high efficiency class D amplifier intended for permanent installation use. It is equipped with switching universal mains power supply and auto-standby functionality when no signal presence is detected providing energy savings.
The amplifier delivers 2x800W at 4ohm and can be used in bridge mode for high impedance 100V/70V lines (providing 1600W of total power). Front LEDs provide information about signal presence, limiters and protection status. At the rear panel the user can configure the stereo / bridge mode and engage an 80Hz 12dB/oct order High Pass filter.
The sober and elegant design together with the euro-block type connectors and energy savings makes it perfect for permanent installations.
Features
- 2 channel amplifier
- 800 W per channel @ 4 ohms
- High Efficiency Class D topology
- Low Z and High Z (Bridged 70 V/100 V) operation
- Universal Power Supply
- 12dB/oct 80Hz HPF filter Selector (on/off)
- Automatic Stand-by mode
DAS 2-channel 800W @ 4 OHM OR 1-channel 1600W @ 100V, 2U
$2,401.26Price
Output Power Ratings Power 8 Ohms, Both Channels Driven 2 x 400 W Power 8 Ohms Bridged 1 x 1600 W Power 4 Ohms, Both Channels Driven 2 x 800 W Power 100 V 1 x 1600 W Power 70 V 1 x 1600 W Electronics and Connectors Amplifier Channels 2 Output Circuitry Class D Frequency Response 20 Hz-30 kHz (+0 – 0.5 dB) Sensitivity 1.38 V (5 dBu) Voltage gain 32.5 dB Damping Factor >350, each channel (8 Ω load, 1 kHz and below) Controls Power On/Off, Gain Pots Cooling Side-Right-to-Left Amplifier Protections Short Circuit, DC Output, Temperature, Over/Under Voltage LED Indicators On-Protect-Standby, Signal-Clip Audio Signal Input Connector Terminal Block Speaker Output Connector Terminal Block Current Draw 230 V / 115 V 3.0 A / 6.0 A Dimensions-Weight Dimensions ( H x W x D ) 88 x 483 x 208 mm
3,5 x 19,0 x 8,2 inNet Weight 3,5 kg ( 7,7 lb ) Shipping Carton Dimensions ( H x W x D ) 170 x 525 x 315 mm
6,7 x 20,7 x 12,4 inShipping Weight 4,3 kg ( 9,4 lb )