QSC MP-A80V
The MP-A Series music and paging amplifiers build on a 50-year legacy of QSC amplifier dependability and quality. The MP-A Series offers an incredible amount of flexibility for business music and paging applications, while maintaining high efficiency and low total cost of ownership.
Class-D output circuitry and switchmode power supply for high efficiency and low cost of ownership
1RU amplifier design for rack space savings
Load selector for driving 4 Ω, 8 Ω, 70 V or 100 V on each channel
Selectable 80 Hz highpass filter offered on each channel
Power saving features - Auto-standby (after 28 minutes with seamless auto-ramp when signal returns) and remote standby input
Amp status remote output
Rock-solid QSC amplifier dependability
QSC MP-A80V
MP-A80V Channels 2 4 8 Power (all channels driven)
8 Ω
4 Ω
70 V
100 V
200 W
200 W
200 W
200 W
200 W
200 W
200 W
200 W
200 W
200 W
200 W
200 WFlexAmp Technology Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio Frequency response at 8 Ω 20 Hz – 20 kHz +/- 0.5 dB Signal to Noise > 103 dB Input sensitivity 1.23 V (+4 dBu) Gain at 8 Ω 30.0 dB Output circuitry Class D Input impedance >10k, balanced or unbalanced Maximum input level 12.3 V (+24 dBu) Cooling
Type
Operating temperature range
Forced air cooling, thermally regulated fan speed, side/rear-to-front airflow
Maximum: -10° - 50° C, recommended: 0° - 35° C, reduced performance above 40° CConnectors
Input connectors
Remote connectors
Output connectors
Two 3.5mm Euro, 3-pin (green)
One 3.5mm Euro, 5-pin (black)
One 5.0mm Euro, 4-pin (green)
Four 3.5mm Euro, 3-pin (green)
One 3.5mm Euro, 5-pin (black)
Two 5.0mm Euro, 4-pin (green)
Eight 3.5mm Euro, 3-pin (green)
One 3.5mm Euro, 5-pin (black)
Four 5.0mm Euro, 4-pin (green)
Front panel indicators Power, signal (per channel), limit / mute / protect (per channel) Rear panel indicators Bi-Color LED signal / limit/ mute/ protect User-configurable operating
modes (per channel)DIP switch selectable, low impedance 4 Ω or 8 Ω,
high impedance direct drive 70 V or 100 VRemote I/O Remote standby, amplifier status enunciation on 3.5 mm connectors Highpass filter 80 Hz DIP switch engaged per channel Dimensions 1.75 in x 19 in x 14.8 in (44 mm x 483 mm x 377 mm) Net weight 7.7 lb (3.5 kg) 9.3 lb (4.2 kg) 12.8 lb (5.8 kg) Shipping weight 12.3 lb (5.6 kg) 13.9 lb (6.3 kg) 17.4 lb (7.9 kg) Power requirements Universal power supply (with active power factor correction),
100 – 240 VAC, 50 -60 HzAgency approvals UL, CE, RoHS/WEEE compliant,
FCC class B (conducted and radiated emissions)Carton contents IEC cable, quick start guide, connector pack